Allgemeines » Seven tips for cleaning aluminum alloy doors and windows

aluminum windows manufacturer,Windows & Doors customized - superhouse

Many families now choose to use aluminum-wood doors and windows in their decoration. As aluminum is a special metal material, the following briefly introduces some cleaning methods for aluminum-wood doors and windows.

1. When cleaning aluminum wooden doors and windows, do not step on the aluminum frame, and do not pull the frame for support. In this way, it is easy to wear out doors and windows or cause accidents by yourself.

2. For aluminum doors and windows, use a soft cloth dipped in water or neutral detergent. Do not use ordinary soap and washing powder, let alone detergents with strong acid and alkali such as decontamination powder, toilet detergent, etc., which will corrode the surface of the profile.

3. Sealing tops and glass glue are the key structures to ensure the sealing and heat preservation of aluminum-wood doors and windows. If they fall off, they should be repaired and replaced in time.

4. After a rainy day, wet glass and door and window frames should be wiped off in time.

5. Check the connection parts of the frame of the door and window of the villa frequently, tighten the bolts in time, and replace the damaged parts. The vulnerable parts of aluminum alloy doors and windows, such as positioning shaft pins, wind braces, and floor springs, should be checked frequently and lubricated regularly to keep them clean and flexible.

6. When aluminum doors and windows are in use, the action should be light, and the push and pull should be natural; if there is any difficulty, do not pull or push, and troubleshoot first. Dust accumulation and deformation are the main reasons for the difficulty of pushing and pulling aluminum alloy doors and windows. Keep the door frame clean, especially the sliding groove. A vacuum cleaner can be used to remove the dust accumulation in the groove and the door seal top.

7. Frequently check the wall joints of aluminum-wood doors and windows. If the aluminum-wood doors and windows are loose over time, it is easy to deform the frame as a whole, making the doors and windows unable to be closed and sealed. Therefore, if the screws of the joint are loose, they should be tightened immediately. If the screw feet are loose, apply a small amount of cement to seal with epoxy super glue.

108 inch 3 panel sliding patio door
full lite entry door
storefront windows for residential use
bay window roof options