Allgemeines » Tips on maintenance of aluminum alloy doors and windows

The doors and windows in the house should be used frequently by us, and they are also the more vulnerable part of many furniture. However, if the owner can skillfully carry out the doors and windows and use and maintain them in peacetime, the service time of the doors and windows can be prolonged. So, let me introduce you some tips on the use and maintenance of doors and windows.

1. For aluminum alloy doors and windows, you can choose to use a soft cloth dipped in clean water or a neutral detergent. Do not use ordinary soap and washing powder, let alone detergent with strong acid and alkali such as decontamination powder and toilet detergent.

2. When cleaning aluminum alloy doors and windows, people try not to step on the aluminum frame, and do not use the frame as a support for people.

3. Check the joints of the aluminum alloy structure frequently, tighten the bolts in time, and replace damaged parts. Locate the vulnerable parts of aluminum alloy doors and windows, such as axle pins, wind braces, and floor springs, and check them frequently, and add lubricating oil regularly to keep them clean and sensitive.

4. After the rainy day, wipe dry the wet glass and door and window frames in time, and pay special attention to dry the water in the chute. The chute is used for a long time, the friction force is added, a little oil or a layer of fire wax can be added

5. Frequently check the joints of aluminum alloy frame and wall. If it becomes loose over time, it will easily deform the whole structure, making the doors and windows unable to be closed and sealed. Therefore, if the screws of the joint are loose, they should be tightened immediately. If the screw feet are loose, use epoxy strong glue to adjust a small amount of cement to seal.

6, In the usual use of aluminum alloy doors and windows, the action should be light, and the push and pull should go with the flow; if you find that you have difficulties, you must not hard pull and push, and the existing defects should be removed first. Dust accumulation and deformation are the main reasons why aluminum alloy doors and windows are difficult to push and pull. The door frame must be clean, especially the position of the sliding groove of the door and window. You can use a vacuum cleaner to remove a lot of dust in the tank and inside the door seal.

7. Always check the joints between the aluminum alloy frame and the wall. If it becomes loose over time, it will easily deform the entire structure, making the doors and windows unable to be closed and sealed. Therefore, if the screws of the joint are loose, they should be tightened immediately. If the screw feet are loose, use epoxy strong glue to adjust a small amount of cement to seal.

8. Of course, how to choose high-quality aluminum doors and windows, it is also necessary to find a high-quality aluminum doors and windows manufacturer!

custom aluminium windows and doors
storm window replacement parts
60 inch by 60 inch windows
home windows for sale